
G& / Geotechnical data platform
The ‘and’ never ends.
One trusted record for every ground investigation, from the first borehole to the engineer's decision.
Inside G&
Investigation overview
45+years
of ground investigation practice behind the platform
~1second
to prepare design-parameter options from 756 SPT tests
Once
field logs typed or scanned, then reused everywhere
Calculation time measured in the G& test environment; engineer review and selection come on top.
One investigation. One record.
From site work to approved deliverables.
Field observations, laboratory results and engineering reports stay connected. No re-entry between the log, the report and the AGS file.
- 01
Capture once
Drilling, sampling, in-situ and laboratory records enter against location and depth, or arrive as AGS or Excel files.
- 02
Check continuously
Integrity, engineering logic, AGS 4.1 reference and plausibility checks run on every record.
- 03
Approve and submit
The responsible engineer approves; the package is generated from approved records only.
The connected record, in practice
See the ground. Keep the evidence.
Compare recorded borehole layers by elevation, with groundwater markers alongside. Every view starts with the investigation record.

Recorded layers, not an inferred geological section. Horizontal spacing is schematic.
Explore outputsEngineering control
Checked before it leaves.
Every result is approved by the responsible engineer before it reaches a deliverable. Independent four-eyes review can be enabled per project.
Methods and standards- 01Entered
- 02Calculated
- 03Checked
- 04Approved
- 05Reported
- 06Submitted
Technical review panel
Methodology and calculations, reviewed.
Dr. Ahmed El-Geneidy
Geotechnical Program Leader, University of Hertfordshire (UH), Cairo Branch
Holds an M.Sc. in geotechnical engineering from the University of Glasgow (UK) and a Ph.D. from Cairo University, with over 35 years across design, analysis and construction supervision at international consultancies including Dar Al-Handasah and ECG. His project record spans major infrastructure, airports, tunnels and high-rise developments across the Middle East, alongside teaching soil mechanics and foundation engineering.
Prof. Naema A. Ibraheim
Professor of Soil Mechanics and Foundations, Pharos University, Egypt
Professor of soil mechanics and foundations with over 30 years of consulting practice in site investigation, laboratory testing and foundation design. A registered consultant engineer in geotechnical engineering and concrete structures, she has published more than 30 papers on collapsible soils, seismic response of dams and soil improvement.
Their review of G& methodology and calculations is separate from the responsible engineer’s approval of project results.
Follow the record's load path
The load path
Your data has a load path. We engineered it.
The only stage where a human types a value. Everything downstream is computed or approved, never re-entered.
- Enters via
- Field logging, lab bench entry, instrument import, legacy AGS / Excel migration
- Authority
- Recording engineer · Data coordinator
What changes at this stage
- Measurement bound to its location, depth interval, and sample ID on write
- Units, method, and instrument recorded alongside the value
- Capture timestamp and author attached — no anonymous rows
- Legacy imports enter through the same mapping, not a side channel
Validations that run here
CONTINUOUSIDs resolve, depths ordered, dates valid, units declared
A raw record cannot leave this stage until integrity and dictionary checks pass.
Want the field-level view — every value as it changes from raw capture to approved release? The full diff table lives on the platform page.
Open the field-level diffDoes G& do design?
G& prepares design-parameter options with their sources and limits; the project's engineer decides. Bearing capacity, piles, settlement, slope stability and foundation recommendations are outside G&.
Can we bring legacy data?
Yes: AGS, Excel and scanned field logs enter through the same checks as live work.
Is G& the official AGS Validator?
No. G& performs AGS 4.1 conformance checks and is not the official AGS Validator. A clean conformance report is not a certification, an approval, or a guarantee that a submission will be accepted.
Where is the data hosted?
Hosting region set per agreement. Data sharing between organisations is off by default.
Start with your investigation