Skip to main content

In the application

Submission readiness, per area, before the file leaves.

Submission control
ReadinessIssue logClient rulesPackage

Export readiness

87%

Blockers

2

Errors

14

Warnings

33

AreaLocationsLab completeAGS checkStatus
Area A4694%PassReady
Area B3888%PassReady w. comments
Area C2282%2 blockersNot ready
Area D22100%PassReady
Coastal development · Demo project
Data explorer
LocationsStrataSamplesIn-situLab
PortfolioProjectsAreasLocationsStrataSamplesLab testsGroundwater
SampleDepth (m)StratumTestState
BH-115/S043.00–3.45SANDPSD (BS 1377-2)Approved
BH-115/S076.50–6.95SANDDirect shearChecked
BH-115/C0211.20–11.80LSTUCSCalculated
BH-115/S1114.00–14.45LSTCollapseFlagged L4
Derived values read-only · standard version stamped on every result

Report review

A factual report can be checked before it is sent.

Generate factual reports from approved records, or bring an existing report into a review pass. G& surfaces comments on scientific problems, data accuracy, missing support, cross-table inconsistencies, and the standards basis behind reported values, then shows what remains before submission readiness.

Review comments support — never replace — the responsible engineer's review.

Factual report / readiness

COMMENTS OPEN

Source alignment

PASS

Scientific review

3 COMMENTS

Submission readiness

PENDING

Data accuracy / report table compared with approved laboratory record

Scientific consistency / description checked against grading and plasticity

Standards basis / cited method and version require engineer confirmation

The line

Five stages, no side doors.

01 / Capture

Field, laboratory, handwriting, AGS, and Excel sources enter once, bound to location, depth interval, and sample identity.

  • — Daily records
  • — Handwriting review
  • — AGS 3 / 4 inspection
  • — Excel-to-AGS compilation

02 / Govern

One central geotechnical database with referential integrity enforced at the database, and standards held as versioned data.

  • — Parent–child schema
  • — Versioned standards
  • — Record history
  • — Role-based access

03 / Validate

Conformance checking and engineering intelligence run on the same record — not in separate tools at the end of the programme.

  • — Four conformance-check layers
  • — SPT & USCS derivations
  • — Issue & correction workflow

04 / Approved

Every result is approved by the responsible engineer before it reaches a deliverable. Independent four-eyes review can be enabled per project.

  • — QA review queues
  • — Forward-only status
  • — Responsible engineer review
  • — Audit log of imports, checks, reviews and exports · in progress

05 / Deliver

AGS 4.1 packages, factual reports, reconciled quantities, and 3D exchange outputs all resolve to the same approved records.

  • — AGS 4.1 & factual reports
  • — Report / BOQ reconciliation
  • — LandXML, IFC, DXF and GeoJSON exports
  • — Submission readiness view

Field-level diff

Every value, as it changes stage.

The same record shown at raw capture, after the standards engine derives values, and once the responsible engineer has approved it — field by field, with the changes marked.

Field-level diff · raw → engineered → approved

Bulk sample, 8.50–9.00 m · classification and Atterberg suite

How each field changes from raw capture through the standards engine to approved release
Field01 · RawTyped once at sourceBaseline02 · EngineeredComputed, read-only10 fields change03 · ApprovedResponsible engineer approval10 fields change
Sample IDField dataAssigned at capture, never reassigned.BH-115/12BH-115/12BH-115/12
Depth intervalField dataTyped once by the recording engineer, then locked to the stratum.8.50 – 9.00 m (typed)8.50 – 9.00 m (bound to stratum 2)Changed8.50 – 9.00 m (locked)Changed
Field descriptionField dataBS 5930 description written at source, refined at review only with a logged reason.Light brown silty fine SANDLight brown silty fine SAND · BS 5930ChangedLight brown silty fine SAND · BS 5930 · approvedChanged
Liquid limit / plastic limitField dataLab bench values — the last point a human types a number.LL 30 · PL 26 (bench entry)LL 30 · PL 26 (input, read-only)ChangedLL 30 · PL 26 (locked)Changed
Plasticity indexDerived valuesComputed as LL − PL by the engine. Never typed on an entry screen.— not yet computed4 (computed · BS 1377-2)Changed4 (approved)Changed
ClassificationDerived valuesDerived from grading and plasticity, not from the describer's opinion.— awaiting engineSM · silty sand (derived)ChangedSM · silty sand (approved)Changed
Standard versionMetadataStandards are versioned data, not settings — the clause in force is stamped on the value.n/a at captureBS 1377-2:2022 · cl. 4.3ChangedBS 1377-2:2022 · cl. 4.3 (frozen)Changed
StateMetadataForward-only. A correction is a new transition, never an overwrite.EnteredCalculated → CheckedChangedApproved → ReportedChanged
MutabilityMetadataWho can still change this, and how.Editable by recording engineerRead-only · correct the input to recomputeChangedLocked · correction raises an issueChanged
ApprovalMetadataOnly a named human act opens the door to a deliverable.— not yet approved— not yet approved (evidence, not deliverable)ChangedResponsible engineer approvalChanged
Released toMetadataWhat this record is allowed to appear in.Internal entry screens onlyQA review and conformance reportsChangedAGS 4.1 · logs · report tables · quantity statementChanged

Automated check · Atterberg ↔ classification consistency

Consistent
LL / PL
30 / 26
PI on record
4
PI recomputed (LL − PL)
4
A-line at this LL
7.3

Group symbol SM cross-checked against the plasticity chart per ASTM D2487; PI recomputed independently per BS 1377-2 and ASTM D4318.

No inconsistency between the Atterberg-derived index and the classification label.

Changed from the previous stage Stage highlighted

Interoperability

Open formats. Your estate stays yours.

G& works alongside existing design tools. With gINT licensing and support winding down (new licences until 31 December 2027, support until 31 December 2028), AGS and Excel intake is available today.

AGS 4.1

Native in and out, dictionary-checked

Excel

Round-trip with mapping profiles

Legacy archives

AGS and Excel intake

Design tools

Coexists via open formats

Modelling workflows

Export-ready data

GeoJSON / CSV

Coordinate systems preserved